Cloud to CAD and No results after verify

Post Reply
smudge611
Regular User
Regular User
Posts: 15
Joined: Fri May 12, 2017 5:19 am

Cloud to CAD and No results after verify

Post by smudge611 » Fri Oct 18, 2019 2:01 pm

Processor: Intel Core i7-8700k CPU 3.70GHz
Memory 16 GB
Windows 10 Pro 64 bit
CMM Manager 3.9.2.7233
PH20 Probe Head
Okay,
I have been using Cmm Manager for a couple months now with varying results
When creating a program I randomly get report Cloud to CAD deviation put in my program.
As you can see in the screenshot below Auto create feature report is shut off.
The other issue I have with reporting is, the only way I can seem to get results is to run the program.
I can create a feature and verify it, but nothing will show up when I report it. Again see screenshot below Enable Live Report is checked.
Any suggestions?
Capture.JPG
You do not have the required permissions to view the files attached to this post.

medupriest
SUDO
SUDO
Posts: 424
Joined: Fri Mar 13, 2015 11:59 am

Re: Cloud to CAD and No results after verify

Post by medupriest » Wed Oct 23, 2019 1:09 pm

The enable live reporting is what will create the Cloud-to-CAD deviation reports automatically.

To report something, you need to add a report step to your program from the report ribbon tab.

smudge611
Regular User
Regular User
Posts: 15
Joined: Fri May 12, 2017 5:19 am

Re: Cloud to CAD and No results after verify

Post by smudge611 » Wed Oct 23, 2019 1:16 pm

i do that and there results still show up with no deviation unless i actually run the program

medupriest
SUDO
SUDO
Posts: 424
Joined: Fri Mar 13, 2015 11:59 am

Re: Cloud to CAD and No results after verify

Post by medupriest » Wed Oct 23, 2019 2:40 pm

I talk about the issue you are describing here viewtopic.php?p=5569.

smudge611
Regular User
Regular User
Posts: 15
Joined: Fri May 12, 2017 5:19 am

Re: Cloud to CAD and No results after verify

Post by smudge611 » Wed Nov 06, 2019 10:36 am

Any response on this yet here is a video showing the issue
https://www.dropbox.com/s/s6prneu2rcji7 ... 2.mp4?dl=0

Thanks

User avatar
Ryan Christopher
Nikon
Nikon
Posts: 237
Joined: Mon Jun 06, 2011 3:00 pm
Location: Sumner Washington
Contact:

Re: Cloud to CAD and No results after verify

Post by Ryan Christopher » Wed Nov 06, 2019 11:00 am

In your preferences, you have a little checkbox: "Update Actual Feature" turned off right now.

Be aware that this little checkbox can be very important. I think of it as "the first of the 2 most important buttons in CMM Manager".
1. If you report as you go then turning this on won't hurt you at all.
2. If you program with CAD and create additional coordinate systems after measuring your features then it might be best to keep this turned off. In the off position, you will be certain that actuals = nominals. Without going into it, Ill just say that it is important for actuals = nominals when creating coordinate systems with cad.
Ryan Tackes
Applications Manager, VMS Inc.
http://www.vantagemeasure.com/

User avatar
CrashN8
Site Admin
Site Admin
Posts: 424
Joined: Thu Feb 09, 2017 4:07 pm

Re: Cloud to CAD and No results after verify

Post by CrashN8 » Wed Nov 06, 2019 11:34 am

Ryan Christopher wrote:
Wed Nov 06, 2019 11:00 am
In your preferences, you have a little checkbox: "Update Actual Feature" turned off right now.
Can you show your work? Even I'm not quite sure what you're referring to...

smudge611
Regular User
Regular User
Posts: 15
Joined: Fri May 12, 2017 5:19 am

Re: Cloud to CAD and No results after verify

Post by smudge611 » Wed Nov 06, 2019 1:51 pm

Capture.JPG
Assume you mean this, it is turned off, I will turn it on and see if it changes anything
You do not have the required permissions to view the files attached to this post.

User avatar
Ryan Christopher
Nikon
Nikon
Posts: 237
Joined: Mon Jun 06, 2011 3:00 pm
Location: Sumner Washington
Contact:

Re: Cloud to CAD and No results after verify

Post by Ryan Christopher » Thu Nov 07, 2019 10:32 am

Yes...This is the checkbox I was talking about.
Ryan Tackes
Applications Manager, VMS Inc.
http://www.vantagemeasure.com/

Post Reply