Mit M443 UD1w error

Topics applicable to newer version(s) of CMM-Manager (3.0+)
Post Reply
User avatar
myork1967
Nikon
Nikon
Posts: 46
Joined: Wed Mar 14, 2012 10:29 pm
Location: Christopher, Illinois
Contact:

Mit M443 UD1w error

Post by myork1967 » Thu Jun 20, 2019 8:18 am

Just installed 3.9 AND 3.8 on a manual mit m443 with a UD1w.

When installing 3.9 i could not get the CMM to connect and gave me a script error. Tried 3.8...same issue.

Did not try 3.7 but did 3.6 sp1 and worked great.
Is there something else needed for this configuration?

Thanks

User avatar
medupriest
Moderator
Moderator
Posts: 400
Joined: Fri Mar 13, 2015 11:59 am

Re: Mit M443 UD1w error

Post by medupriest » Thu Jun 20, 2019 12:26 pm

This is likely due to the OS. At 3.8 we went to a 64-bit build. Perhaps try re-downloading the drivers from here viewtopic.php?f=10&t=530, install the 64-bit driver, and see if the behavior changes.

User avatar
myork1967
Nikon
Nikon
Posts: 46
Joined: Wed Mar 14, 2012 10:29 pm
Location: Christopher, Illinois
Contact:

Re: Mit M443 UD1w error

Post by myork1967 » Mon Jun 24, 2019 8:38 pm

thanks for the reply.

makes sense.

Post Reply