Feature Suggestion - Transform / Copy

Topics applicable to newer version(s) of CMM-Manager (3.0+)
Post Reply
New User
New User
Posts: 1
Joined: Mon May 20, 2019 4:48 am

Feature Suggestion - Transform / Copy

Post by joeyhilson22 » Mon May 20, 2019 4:51 am

Hello everyone,

The last few days I have been using the transform function and works well.

The only thing I would suggest is when you highlight the features you are going to transform, add in the ability to pick the number of times you want to transform along with the translation and or rotation....

I.E. I have a bolt hole with 30 holes. Instead of cut/paste translate, pick the feature(s) add in the amount of times to translate/rotate and the offset and or angle....

Hope that was clear...it's late here :)

User avatar
Site Admin
Site Admin
Posts: 375
Joined: Thu Feb 09, 2017 4:07 pm

Re: Feature Suggestion - Transform / Copy

Post by CrashN8 » Mon May 20, 2019 9:27 am

We've already added the "Copy" Transform option that you mention - i.e. user can specify number of copies that will be translated and/or rotated. This was added in version 3.6. I will add the request to highlight features in Main Graphics too. Thanks for the input.

You do not have the required permissions to view the files attached to this post.

Post Reply