5 posts • Page 1 of 1
I am a new user and have gotten to where I can get the MMC Bonus tolerance to calculate properly in cartesian and polar coordinates. However when the report is previewed and made, the only tolerance that shows up is "total". Is there a setting or option to have CMM manager include the bonus tolerance separately as part of a circle or hole position? In this example the drawing tolerance is TP .010 with MMC. The hole is .0055 above MMC so total tolerance is .0155
You do not have the required permissions to view the files attached to this post.
Use the [Note] button in the Report operation (it's available for all report operations) to add text that indicates original tolerance. You can use this note to add the entire Feature Control Frame if you'd like - i.e. "T.P. 0.010 (M) | A | B (M) | C"
This has been a customer reported request since at least August 2012... To be honest, we are always hesitant to make changes to our standard report since there are a lot of 3rd parties that parse our report for use in SPC, database, etc. I will bring this issue back to our recent backlog and discuss with software team to see if we can find a clever way to display this extra info.