Ballooned dimensions on report

Post Reply
jaudelo1
Regular User
Regular User
Posts: 15
Joined: Thu Apr 23, 2015 3:55 pm

Ballooned dimensions on report

Post by jaudelo1 » Thu Aug 06, 2015 5:04 pm

Is there a way to rename the "Tolerance Report" header to show a number that corresponds with my ballooned print? For now, the best solution I've been able to come up with is to add the balloon number to the "Notes" section of the report.

User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1092
Joined: Wed Feb 23, 2011 7:26 pm

Re: Ballooned dimensions on report

Post by US_Helpdesk » Mon Aug 10, 2015 9:02 am

Using Note is in fact the best method. You can suppress the Tolerance Report numbering all together from Preferences if needed.
I've migrated to a new user account, see my other posts here

User avatar
mhochkins1
Nikon
Nikon
Posts: 253
Joined: Tue Mar 22, 2011 12:10 pm
Location: Linden, MI

Re: Ballooned dimensions on report

Post by mhochkins1 » Tue Aug 11, 2015 3:26 pm

Personally, I use the "User Notes" to create an output entry with the balloon number such as "ITEM - 1". If you place an empty space line above and below the "ITEM - 1" output, it makes a nice separation between the item output and feature output.
Item1_balloon.jpg
You do not have the required permissions to view the files attached to this post.
Best Regards,
Mark Hochkins

jaudelo1
Regular User
Regular User
Posts: 15
Joined: Thu Apr 23, 2015 3:55 pm

Re: Ballooned dimensions on report

Post by jaudelo1 » Tue Aug 11, 2015 4:04 pm

Excellent, thank you.

jsk326
New User
New User
Posts: 2
Joined: Fri Jan 24, 2014 1:08 pm

Re: Ballooned dimensions on report

Post by jsk326 » Thu Mar 14, 2019 8:45 am

I have been doing the same as it makes it much simpler to analyze the information. Is it possible to add a different font for user notes?

Post Reply