Quick question

Post Reply
lcray30
Regular User
Regular User
Posts: 17
Joined: Tue Apr 14, 2015 6:12 am

Quick question

Post by lcray30 » Thu Oct 04, 2018 7:35 am

I have finally been able to sit down and try and work through this gear package. One question that my bosses have asked me about this package. If we were to receive a busted up gear from a customer and we know no information about the gear except for probably number of teeth will this software fill in the blanks for me after I measure the gear.

For example the items according to the tutorial I am supposed to fill out in this window when I first start it up.
Capture.PNG
You do not have the required permissions to view the files attached to this post.

lcray30
Regular User
Regular User
Posts: 17
Joined: Tue Apr 14, 2015 6:12 am

Re: Quick question

Post by lcray30 » Thu Oct 04, 2018 12:03 pm

I take it no one uses this forum anymore?

User avatar
medupriest
Moderator
Moderator
Posts: 345
Joined: Fri Mar 13, 2015 11:59 am

Re: Quick question

Post by medupriest » Mon Oct 08, 2018 10:17 am

Sorry for the delay. The forum is still well in use. The gear module will not fill in the blanks. You do need to have this information for the software to measure the gear properly.

Murguel
Frequent User
Frequent User
Posts: 47
Joined: Mon Aug 13, 2018 9:59 am

Re: Quick question

Post by Murguel » Tue Oct 09, 2018 3:21 am

Neither the forum, nor the online support from Nikon is well. I will do a formal complaint to Nikon headquarter. That's not acceptable. I suggest, you all to the same.

Post Reply