SP25 - What controllers are supported?

Post Reply
User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1087
Joined: Wed Feb 23, 2011 7:26 pm

SP25 - What controllers are supported?

Post by US_Helpdesk » Fri Mar 20, 2015 10:42 am

CMM-Manager does not support SP25 probe on all DCC interfaces...

Currently we support - LK / Nikon, Sheffield SMP, Renishaw UCC, I++ / DME &
Mitutoyo UC.

We plan to include support for Pantec, Deva DCC, Leitz... If you have interest in SP25 on a non-supported DCC interface please contact your local sales rep or dealer.

The attached Renishaw Scanning Calibration DLL must be registered on system running SP25 probe. Just run .MSI installer to register (regsvr32 / regsvr) Calibration.dll
You do not have the required permissions to view the files attached to this post.
I've migrated to a new user account, see my other posts here

User avatar
DavidAlvarez1
Nikon
Nikon
Posts: 14
Joined: Tue Mar 22, 2011 12:37 pm
Location: Chandler, AZ
Contact:

Re: SP25 - What controllers are supported?

Post by DavidAlvarez1 » Wed Aug 26, 2015 10:48 pm

I have a customer interested in SP25 support for the Mitutoyo ComUC, any update is appreciated.

User avatar
CrashN8
Site Admin
Site Admin
Posts: 494
Joined: Thu Feb 09, 2017 4:07 pm

Re: SP25 - What controllers are supported?

Post by CrashN8 » Fri Sep 28, 2018 9:29 am

Dave... SP25 has been supported no on Mitutoyo controllers for a couple releases. Hopefully you caught wind of this through other sources such as release announcements I've sent out. Anyway, you should be able to address this SP25 probe support now with your customer.

Post Reply