Brown & Sharpe Gage 2000

Post Reply
nhorstman
New User
New User
Posts: 2
Joined: Fri Dec 11, 2015 11:25 am

Brown & Sharpe Gage 2000

Post by nhorstman » Fri Dec 11, 2015 11:34 am

Hello we have a B & S Gage 2000 and the firmware card v 2.4 went out. We are trying to limp it along in hopes we do not have to upgrade to a retrofit IM-USB interface. Does anybody out there have any of these old cards laying around they want to get rid of? Any help would be greatly appreciated.

User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1092
Joined: Wed Feb 23, 2011 7:26 pm

Re: Brown & Sharpe Gage 2000

Post by US_Helpdesk » Mon Dec 14, 2015 3:16 pm

This is in regards to Gage 2000 Reflex Box, right? I'll check around again to see what I can find.
I've migrated to a new user account, see my other posts here

nhorstman
New User
New User
Posts: 2
Joined: Fri Dec 11, 2015 11:25 am

Re: Brown & Sharpe Gage 2000

Post by nhorstman » Tue Dec 15, 2015 5:58 am

Yes it is the Reflex Box. This appears to be the needle in the hay stack syndrome! Any assistance would be greatly appreciated.

User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1092
Joined: Wed Feb 23, 2011 7:26 pm

Re: Brown & Sharpe Gage 2000

Post by US_Helpdesk » Tue Dec 15, 2015 10:37 am

Looks like there are no good options for this... I just checked with Chuck at Insight (probably the most knowledgeable person for manual CMMs in the industry) and he has no leads for this. Do you want to send it to us for evaluation? Maybe it's just a power supply or something simple? We could try re-writing the firmware... IDK, just a thought.
I've migrated to a new user account, see my other posts here

User avatar
cmmcal
Nikon
Nikon
Posts: 1
Joined: Fri Feb 22, 2013 12:04 pm

Re: Brown & Sharpe Gage 2000

Post by cmmcal » Fri Feb 09, 2018 9:54 am

If you are still looking for a program card for the reflex you can contact me at Kim@cmmcal.com I am a specialist in brown and sharpe and probably have what you need

Post Reply