UC-100 -200 -220 -300 PCI (DCC)

User avatar
Posts: 1094
Joined: Wed Feb 23, 2011 7:26 pm

UC-100 -200 -220 -300 PCI (DCC)

Post by US_Helpdesk » Mon Oct 22, 2012 12:08 pm

Models: UC-100, UC-200, UC-220, UC-300, UC-330
UCDBW.dll/UCDBW.sys (ComUC-PCI) need to be present in the system32 and system32\Drivers folders respectively

Instructions to register Renishaw scanning probe calibration DLL to make it work with CMM-Manager on 3rd party controllers with scanning probe - Download and install new Scanning SDK .msi here

PHC’s default PAD = 4 when used with Mitutoyo CMM but could revert to 26 on some Windows 7 PC’s and latest NI 488.2 software.

64 bit ComUC Card Drivers:
CMM-Manager is a 32bit application and it can only use 32bit “UCDBW.DLL” which needs to be copied to the following location:

If on a Windows 64bit OS

If on a Windows 32bit OS

Also the “UCDBW.INI” file needs to be copied to the same location as “UCDBW.DLL” as this file is read by UCDBW.DLL.

Note: Do not supply newer HP desktop with Mitutoyo ComUC / we suggest Dell t5810 workstation or Dell Precision 3630
ComUC PCI Drivers: - Windows - 32/64bit

It appears you don't have a PDF plugin for this browser... you can click here to download the PDF file.

You do not have the required permissions to view the files attached to this post.
I've migrated to a new user account, see my other posts here