Mitutoyo CMM FN503 error code E650, E808 and E803

Post Reply
allenp
New User
New User
Posts: 2
Joined: Mon Nov 14, 2016 3:10 pm

Mitutoyo CMM FN503 error code E650, E808 and E803

Post by allenp » Mon Nov 14, 2016 3:14 pm

hi, we bought used older (1990's) Mitutoyo CMM with win2000 and cosmos but after connecting all cables, opening all air pads and turning it on for the first time, the display says just "E650", when you reset the unit using the switch behind the panel on front side of CMM's power unit (and servo unit) I get the E805 and sometimes E803 code.
what do those mean and what could be the problem, thanks?

User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1092
Joined: Wed Feb 23, 2011 7:26 pm

Re: Mitutoyo CMM FN503 error code E650, E808 and E803

Post by US_Helpdesk » Tue Nov 15, 2016 1:36 pm

There is a thread in this Forum for Error Code Table on Mitutoyo controller. Just have a look at the sticky topics at the top of this forum. There is a PDF document that references every known error code.
I've migrated to a new user account, see my other posts here

allenp
New User
New User
Posts: 2
Joined: Mon Nov 14, 2016 3:10 pm

Re: Mitutoyo CMM FN503 error code E650, E808 and E803

Post by allenp » Sat Feb 24, 2018 8:10 am

Why does x axis reader on cmm lights up when active and those for y and z axis dont?

Post Reply