Page 1 of 1

Mituotyo B504B CMM with CMM Manager

Posted: Tue Aug 02, 2016 12:28 pm
by gcalin
Hello everyone,

We have an old Mitutoyo B504B CMM, a Mag-1 controller and an old IBM computer with a GPIB ISA Card running GEOPAK3. It is working ok, however I would like to use it with CMM Manager.

Does CMM Manager work with GPIB-USB converter, like NI GBPI-USB-HS, Prologix GPIB-USB or Agilent/Keysight 82357B USB/GPIB interface?

http://sine.ni.com/nips/cds/view/p/lang/pt/nid/201586
http://prologix.biz/gpib-usb-controller.html
http://www.keysight.com/en/pd-851808-pn ... =CA&lc=eng

Thank you,

Gabriel

Re: Mituotyo B504B CMM with CMM Manager

Posted: Tue Aug 02, 2016 1:07 pm
by medupriest
CMM-Manager does work with the NI GPIB adapter. The National Instruments GPIB is the only one we do support. Both the USB and PCI versions work.

Re: Mituotyo B504B CMM with CMM Manager

Posted: Tue Aug 02, 2016 1:16 pm
by mhochkins1
We can help you with your retrofit if you are interested. We have old Mitutoyo parts and retrofit them regularly, however we are no longer owned by Mitutoyo.