COM port settings for PHC 10-2

Luke Skywalker
Participant
Participant
Posts: 8
Joined: Thu Oct 10, 2013 7:52 pm

Re: COM port settings for PHC 10-2

Post by Luke Skywalker » Tue May 10, 2016 7:59 pm

I'm going to try those GPIB adresses and see what happens... :cry:

But that cable doesnt look like GPIB at all... :|

User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1092
Joined: Wed Feb 23, 2011 7:26 pm

Re: COM port settings for PHC 10-2

Post by US_Helpdesk » Wed May 11, 2016 9:17 am

Well... What was it when you first made the system work? It must be the same now. Please look at the back of the PC, there should be a connection to the Mitutoyo ComUC card and then also either a serial or GPIB connection for the Probe Head.
I've migrated to a new user account, see my other posts here

Post Reply