Search found 6 matches

by bwatrous
Wed Aug 03, 2016 10:02 pm
Forum: Hexagon (B&S)
Topic: In-Position Error
Replies: 3
Views: 7397

Re: In-Position Error

Nate thanks for the fix. I just tried it on a MicroXcel with Sharpe32 and it worked great!
by bwatrous
Tue Apr 26, 2016 12:37 am
Forum: General Application Support
Topic: Batch Run Problem
Replies: 5
Views: 6021

Re: Batch Run Problem

Nate, I was working with a customer today and we experienced the exact same issue. We had the part in a fixture and the center of each part was located exactly 3" from one another. Added a move to get machine over the part and programmed an alignment. After completed alignment told machine to measur...
by bwatrous
Thu Jun 04, 2015 10:49 am
Forum: General Application Support
Topic: PH10M & PH10T
Replies: 2
Views: 3879

Re: PH10M & PH10T

Perfect. Thanks Nate. Much appreciated!
by bwatrous
Wed Jun 03, 2015 12:56 am
Forum: General Application Support
Topic: PH10M & PH10T
Replies: 2
Views: 3879

PH10M & PH10T

I just installed a machine and it is a little different from the customers existing CMM. One machine is running a PH10M/PAA1/TP20 and the new machine has a PH10T/TP20. Both are running CMM Manager 3.4 SP1. Can I take programs written on the PH10M machine and immediately run them on the PH10T? Or is ...
by bwatrous
Thu Feb 05, 2015 5:40 pm
Forum: Renishaw
Topic: Supported Renishaw Software
Replies: 3
Views: 5621

Re: Supported Renishaw Software

I put 4.9 on and so far everything is working great.
by bwatrous
Thu Feb 05, 2015 4:38 pm
Forum: Renishaw
Topic: Supported Renishaw Software
Replies: 3
Views: 5621

Supported Renishaw Software

I'm working on a renishaw retrofit, and am installing a UCC T3 Plus SPA3. Currently I'm running UCC Suite 4.7 but am running into some issues. Renishaw asked if I could upgrade to suite version 4.9. Would it work or cause problems. I'm using the I++ server so no direct coms.