Search found 13 matches

by manfred87
Tue Jul 16, 2019 7:24 am
Forum: Deva
Topic: PHC10-3Plus Error by loading CAD
Replies: 2
Views: 77

PHC10-3Plus Error by loading CAD

Hi guys,

any idea? When I load CAD models I receive the probe head error 2000 and asks me to disconnect.

PH10M is then not indexing anymore and telling me the machine is still moving

Machine's Deva controlled

Thx in advance
by manfred87
Fri Jul 05, 2019 6:28 am
Forum: Reporting
Topic: ISO tolerances
Replies: 1
Views: 96

ISO tolerances

Is it planed, to have ISO-tolerances for holes (picture) and shafts integrated?

Many customers ask for that

regards
by manfred87
Thu May 23, 2019 11:24 am
Forum: Program / DCC Settings
Topic: How to change DCC settings
Replies: 1
Views: 273

How to change DCC settings

Hi guys,

where can those settings be changed?
Couldn't find any in CMM-M?
Deva Controller

Thx
by manfred87
Mon Feb 11, 2019 8:43 am
Forum: Deva
Topic: RTP20 indexing problems
Replies: 3
Views: 756

Re: RTP20 indexing problems

Thx Nate

I'm gonna have a try on wednesday to friday this week and will let you know
by manfred87
Tue Jan 15, 2019 8:50 am
Forum: Deva
Topic: RTP20 indexing problems
Replies: 3
Views: 756

RTP20 indexing problems

Hi, I'm using a Aberlink machine with Deva controller. Now in CMM-M 3.8 SP1 I have problems indexing the RTP20 in A60 and A75 positions. The Angle positioning is okay, but in turning in B (I need A60 B-105 and what I get is A60 B-60) the movement is not right, the machine is nearly crashing the head...
by manfred87
Fri Jul 06, 2018 3:36 am
Forum: Measured Features
Topic: Measuring symmetry/balance of groove to axis of a shaft
Replies: 2
Views: 1388

Re: Measuring symmetry/balance of groove to axis of a shaft

Thanks, tried like you said, measuring the same as I did before...
Wondering if now we really are wrong or our customer is...
Forwarded that to a impartial measuring laboratory
by manfred87
Tue Jul 03, 2018 10:25 am
Forum: Measured Features
Topic: Measuring symmetry/balance of groove to axis of a shaft
Replies: 2
Views: 1388

Measuring symmetry/balance of groove to axis of a shaft

Hi, profane question at first sight :? . How do i measure the symmetry of a groove to the shaft's axis? Using cylinder as level, next a constructed point between two points left and right in the groove to construct line between axis cylinder and that point to align it, a plane in front of the shaft,...
by manfred87
Tue May 22, 2018 4:50 am
Forum: Vision / Video Measurement
Topic: Issues using TP
Replies: 2
Views: 1520

Re: Issues using TP

Had another try, distance between 2 lines would be ok, distance between 2 Points was not ok, had those about 2 mm difference
by manfred87
Tue May 22, 2018 3:47 am
Forum: Vision / Video Measurement
Topic: Issues using TP
Replies: 2
Views: 1520

Issues using TP

I'm having Issues using the TP on Nexiv. Measuring a gauge block of 20 mm, CMM Manager measures 21.970 mm. Tried to calibrate the TP with Calibration tool (19mm diameter) shows 19 mm diameter, TP is the VMA Standard Stylus Dia 2 Length 10. Checking the TP by AutoMeasure Software, TP measuring ok. An...
by manfred87
Fri May 18, 2018 2:13 am
Forum: Vision / Video Measurement
Topic: Where to find ErrorMapConverter?
Replies: 1
Views: 1195

Where to find ErrorMapConverter?

Hi all,

is there a possibility to get the ErrorMapConverter? Or is it only possible to get the Nexiv_iq.dat via cmmmgr.nm@nikon.com?

best regards