CMM-Manager Case Studies

Related Case Studies

Software Speeds CMM Programming - Manufacturing Engineering November 2005 Vo. 135 No.5

"The goal was to find a software package that could handle all CMM programming needs off-line or on-line, for diverse machines, and do it at minimal cost with a short learning curve," explains Bill Hopkins, senior CMM manager at TECT. For the complete article, please click here

CMM-Manager Software turns old CMMs into new profit centers.

Stillwater Technologies of Troy, Ohio is a specialty tooling and machining company that makes a huge array of parts. To handle increased demands on measurement inspection, they retrofitted their older CMMs with fast, easy-to-use software at a fraction of the cost of new CMMs. For the complete article, please click here

CMM-Manager simplfies and automates tool inspection at BTM Corporation

Michigan-based tool maker BTM Corporation opted for Metris' user-centric CMM-Manager software to automate serial inspection on different CMM brands. BTM quality technicians also rely on CMM-Manager's walk-in measurement capability to quickly take points on prototypes and first-articles. For the complete article, please click here

Customer Testimonials

This is to convey the appreciativeness of the assistance we received from one of your employees, Nate. Due to a computer issue here, we had to email in for some technical support and it was our good fortune that we got Nathan on the other side of the line. His professionalism and knowledge of the software that we were using was instrumental in getting our CMM back up in running in no time. With so many companies out there wanting people to use their software, your customer service makes you stand out from other vendors and will definitely be considered before any other software systems are purchased by us. “Special thanks to Nate.”

~ Satisfied Customer


Contact	Dealer Page	© 2010 Nikon Metrology, Inc.